LINKS -

DOWNLOAD OUR LITERATURE

WATER TREATMENT

BOILER WATER TREATMENT

REVERSE OSMOSIS

ION EXCHANGE

WASTEWATER TREATMENT

WHOLE HOUSE SYSTEMS

FILTRATION

SITE INDEX

HOME PAGE

SYSTEM CONTROLS

WHERE'S REMCO?

pH AND ORP CONTROLLER/RECORDERS

Remco Engineering pH controller/recorders are mounted in Nema 4X fiberglass enclosures. They feature both high and low outputs for controlling dual metering pumps. A 4-20 milliamp output is for the optional chart recorder. Front panel controls allow setting of the individual high and low setpoints and for calibration of the zero setpoint and span.

Bayonet mount pH probes allow easy changing of the probes. Probes are available for both inline and over-the-side installations. All probes are constructed of pvc bodies with 0-ring seals. Each probe cable is enclosed in a flexible conduit to prevent damage to the cable. Probe lengths are available up to 50 feet in length in 5 foot increments.

The chart recorder is a Rustrak or Fuji with 4-20 ma input adjusted for 0-14 pH. The Fuji has an adjustable scale. We mount, interface, and calibrate the system as a unit before it is shipped.

To order specify controller, probe type, cap & cable, and probe length:

     Part #               Description 

     2530                 pH controller only in NEMA 4x (fiberglass or polycarbonate) enclosoure

     2966-R              pH and chart recorder Rustrak

     2966-F              pH and chart recorder- Fuji

     1047                 Probe, free hanging 

     1597-XX            Cap and cable, free hanging probe (XX-= cable length

     5360                 Probe, inline (requires 5361 gland for new installations) 

     5361                 Gland for 5360 on new installations (3/4" NPT)

     5362-XX             Cap and cable, inline probe (XX= cable length)

     2576-XX              Probe cable umbilical