Phone 805-658-0600
Fax 805-658-0667

LINKS -

DOWNLOAD OUR LITERATURE

WATER TREATMENT

BOILER WATER TREATMENT

REVERSE OSMOSIS

ION EXCHANGE

WASTEWATER TREATMENT

WHOLE HOUSE SYSTEMS

FILTRATION

SITE INDEX

HOME PAGE

SYSTEM CONTROLS

WHERE'S REMCO?

 

REMCO ENGINEERING ION EXCHANGE FEATURES

    1. No hidden costs.
    Only complete systems are sold. All pumps, tanks, and controls are included. Each system is designed for automatic, unattended operation. You add the feed stream, power, water, and air and we do the rest. Final pH adjust of regenerant is available.

    2. Designed for a long useful life.
    Our systems are designed for the environment you put them in. Our skids and electrical enclosures are constructed of fiberglass. All enclosures, pushbuttons and switches are Nema 4 (non-corroding/watertight). All conduit and tubing are corrosion resistant. We expect that 10 years from now, a little scrubbing and cosmetic touch up paint will make it look as new.

    3. Easy to operate.
    Our self monitoring systems require little operator attention. An optional regeneration alarm warns the operator of impending breakthrough. Regeneration is a one step "push-the-button" and go to lunch operation.

    4. Manual backwash override included.
    Complete manual operation of the backwash cycle is included. Full control of the manual override is included at no extra charge.

    5. Low operation costs.
    Microprocessor controlled regeneration program optimizes regenerant use and recovery. When used in conjunction with other recovery methods such as electrowinning, the regenerant can be reused. The system can also optimize water use during regeneration, using as little as 1/3 of the water a standard DI type systems would use.

    6. Easy to maintain.
    All valves are air operated and critical (all normally closed) valves have tru-union connections for less than 60 second change out. One button operation of the media filter backwashes into bag filter with quick change access. Optional differential pressure initiation of backwash cycle is available.

    7. Minimal downtime.
    Duplex feed pumps (A or B) allow operation while cleaning or repairing either pump. Duplex media filtration (optional on smaller systems) eliminate downtime while backwashing. Automatic filter backwashing and switching is available on all systems.

    8. Maximized on-line time.
    Proportional pH adjustment maximizes the percentage of time on line. When the main feed tank is out of the operational pH range, no solution should flow through the system. The less time spent out of range, the smaller the system you can buy for your needs. We use large metering pumps and proportional pH control for fast and accurate pH control.

    9. Microprocessor control
    Our regeneration cycle is controlled by a non-proprietary microprocessor. This system is infinitely flexible and allows us to optimize our regeneration cycle, providing an extremely high percentage of regenerant recovery along with low water use. Our cycles feature air blow downs to minimize dilution, cross contamination and to maximize recovery, bump cycles to clear screens for maximum flows, and leach steps to remove acid or caustic solutions from within the resin to minimize water use. This flexibility is unique to us.

    COMPARE US WITH THEM !

    FEATURE
    QUALITY
    REMCO
    THEM #1
    THEM #2
    Complete system, nothing else to buy
    -
    YES
    		   
    pH adjust/holding tank
    MATERIAL
    -
    		   
    Fiberglass skid
    -
    -
    		   
    Auto/Manual backwash included
    -
    YES
    		   
    Dual (high/low) pH control
    -
    YES
    		   
    Proportional pH adjustment
    -
    YES
    		   
    Duplex (2) feed pumps
    BACKUP
    YES
    		    
    Polypropylene regenerant tank
    MATERIAL
    PP
    		    
    Large media filter
    SIZE
    -
    		   
    Low regenerant volume/cycle
    GALLONS
    -
    		   
    Bag filter for media backwash
    -
    YES
    		   
    Fiberglass electrical housings
    MATERIAL
    NEMA4
    		   
    Non-metallic electrical operators
    MATERIAL
    -
    		    
    Non-proprietary microprocessor
    -
    YES
    		    
    Regeneration cycle flexibility
    -
    YES
    		    
    Counterflow regeneration
    -
    YES
    		    
    Resin leaching during regeneration
    -
    YES
    		    
    Resin type & quantity
    TYPE/QTY
    -
    		    
    Non-proprietary resin
    MFG'R
    -
    		    
    Air operated valves
    -
    YES
    		    
    Fails safe to recirculation mode
    -
    YES
    		    
    On-line during regeneration
    -
    YES
    		    
    Tru-Union valves
    -
    YES
    		    
    Lead/lag column configuration
    -
    YES
    		    
    Low water use during regeneration
    GALLONS
    -
    		   
    High regenerant recovery
    %
    -
    		   
    Breakthrough alarm
    -
    YES
    		    
    Installed customer base
    -
    YES
    		    
    Knowledgeable technical support
    -
    YES
    		    
    Value engineered
    -
    YES
    		    
    Remote Monitoring, Control, and Servicing
    -
    -
    		   

    Cost

    -
    -
    		   

     

    NO ONE GIVES YOU MORE FOR YOUR DOLLAR. 
        CHEAPER IS TOO CHEAP, MORE EXPENSIVE IS TOO MUCH.